EPS8 LIVE 2x100W
Technical specifications:

Speakers:
- System Type: 2-Way Vented Passive Speaker Cabinet
- Continuous power: 100W
- Peak power: 400W
- Max SPL (1M): 113dB
- Frequency Response: 68Hz-20kHz (-6dB)
- Crossover Frequency: 2.2kHz
- Protection: PTC Protection for HF
- Impedance: 4 Ohms
- Transducer Low: 8” Woofer, 1.5” Voice Coil
- Transducer High: 1” Ferrite Drive, 1” Voice Coil
- Connectors: ¼” Jack
- Mounting: 36mm standard pole-mount
- Dimensions: 420x270x240mm

Mixer:
- Input Channels:
Micro input: Electronically Balanced, Discrete Input
Frequency Response: 20Hz to 22kHz, +/- 3dB
Gain: 55dB
Line Input: Electronically Balanced
Frequency Response: 20Hz to 22kHz, +/- 3dB
Gain: 10dB
- Impedance:
Microphone Input: 1.5kOhm
All other input: 10kOhm or greater
RCA Out: 1kOhm
All other output: 120Ohm
- Equalization:
Hi shelving: +/- 14dB @ 12kHz
Low shelving: +/- 14dB @ 80Hz
- Main Mix Section:
Noise (Bus Noise): Fader 0dB, channels muted: -85dBr (refL + 4dBu) ; Fader 0dB, all input channels assigned ans set to UNITY gain : -81dBr (ref : +4dBu)
Monitor Max Out: +22dBu unbalanced, ¼” jack
RCA Max Out: +22dBu unbalanced, RCA
- THD: THD <0.5% @ 1W output power ; THD <1%W output power
- S/N:
SNR (signal to noise ration) set output line to 1kHz : >80dB
- Power Amplifier Section:
Output power: 300W RMS @ 1kHz, THD = 1%, Load = 4Ohm
Frequency Response: 20Hz to 22kHz, +/- 3dB

Weight (speakers and mixer): 13,5kgs
390.83€
Where to purchase?
?>