The F8S is amplified subwoofer designed for recording studios and home studios. However, it will find its place in a home theater or gaming system. The F8S Fluid Audio F8S will give you an exceptional bass response while keeping a compact size. Current music requires the use of a bass reinforcement whether mixing or listening.
Being able to listen to your mix with this bass reinforcement is essential to create your music with precision. The F8S subwoofer will allow you to hear every detail up to 30Hz. The F8S also has two built-in EQ settings that will allow you different settings depending on the type of music.
Features:
- 8 "paper cone composite speakers and rubber damping membrane
- Power amplifier: 200 Watt RMS class D
- Frequency response: 30 - 200 Hz
- Front volume control
- Port Bass-Reflex on the front
- Balanced XLR inputs and 6.3mm RCA / unbalanced RCA
- Balanced XLR outputs and 6.3mm unbalanced jack
- Low-pass filter adjustable: 50 Hz - 200 Hz
- Setting options "Flat" or "Punch"
- Signal to noise ratio:> 100 dB (typical, A-weighted)
- Polarity: a positive signal on the + input causes a forward movement of the subwoofer diaphragm
- Protections against overheating, transients and subsonic protection circuit
- Input impedance: 20 Ohm balanced, 10 kOhm asymmetrical
- Input sensitivity: 85 mV (pink noise input producing 97 dBA SPL output at 1 m distance with maximum level control
- Standby function of the amplifier
- Phase controller
- Plywood enclosure with vinyl coating
- Pedal foot switch connector to activate and deactivate the F8S
- Interference protection
- Output voltage limiter
- External main fuse
- Power supply: 220 - 240 V ~ 50 Hz
- Dimensions: 340 x 254 x 270 mm
- Weight: 7.9 kg
Brand reference number:
7310_F8S